Why does my BT box have no sound?

Why does my BT box have no sound?

Make sure you have an RF (aerial) connection to the YouView box. Make sure you have tuned the broadcast channels on the box (via YouView settings > TV Signal & Quality > Re-tune Channels) Reboot the box via the switch on the back, making sure the aerial is still connected.

How do I unmute my BT YouView box?

YouView volume button on your remote control to unmute the volume.

Where is the reset button on my BT box?

Select a TV box for more information

1. Switch power off by removing the power cable.
2. Press and hold the reset button on the right-hand side of the box.
3. Plug the power cable back in whilst still holding the reset button – continue to hold the reset button down, do not release it yet.

How do I turn up the volume on my BT YouView box?

Press and hold the AD button (next to zero on the remote) and whilst still holding the AD button use the volume buttons also on the remote this will increase and decrease the actual youview box volume.

Can my BT remote control my soundbar?

Yes, you can connect your TV box to a Surround Sound system using either a TOSlink cable or an HDMI cable. button on your remote control to find out whether the programme supports Surround Sound.

How do I get my bt remote to control volume?

Re: volume control on remote AD + Volume controls the volume from the YouView box & I think should always be 100% & then left alone. Then just control the volume from the TV itself.

How do I connect my BT remote to my BT box?

How do I control my TV with my BT TV remote control?

1. Hold down both the TV and TV AV buttons for at least three seconds until the blue light flashes three times.
2. Release the buttons and enter the four-digit code for your brand of TV.
3. Point your remote at your TV and hold the TV button until your TV turns off.

Will BT replace a faulty YouView box?

Re: BT box replacement If you have an active BT TV subscription, BT support will replace faulty boxes, if you don’t then BT won’t offer any support, you’ll have to purchase your own.

How do I get my bt box out of maintenance mode?

A red light should appear on the front of the box. Press and hold the down arrow button on the top of the box for five seconds until you see the “Enter Maintenance Mode Y/N” prompt. The box light will turn blue and you should now exit maintenance mode with things working as normal.

How do I connect my soundbar to my BT box?

Connect the Soundbar to a Bluetooth® Device

1. Press the Source button on the soundbar or remote until BT appears on the display.
2. Set the soundbar to BT mode.
3. Press and hold the Source button on the soundbar or remote.
4. Continue holding until BT PAIRING appears on the display.

How do I connect my soundbar to my YouView box?

HDMI cable

1. Connect one of your HDMI cables to the HDMI port on the back of your YouView box.
2. Connect the other end of your HDMI cable to the HDMI In port on the back of your surround sound system.
3. Connect another HDMI cable to the HDMI out port on the back of your surround sound system.